Page 1 of 1
headlight bulb removal
Posted: Mon Oct 18, 2004 2:56 pm
by kenmcklr
I'm new to the group and I need some advice. My 02 needs a headlight
bulb. To remove the old one it looks as if it plugs in. Can it be
removed by pulling straight back on the dust cover or is there
something I'm not seeing. Don't want to screw up. Thanks in advance
for the help.
headlight bulb removal
Posted: Mon Oct 18, 2004 3:52 pm
by rsanders30117
It's hard to see but there is a metal wire clip that must be pinched
together, then it is unlatched & will swing out of the way. I
suggest taking the time to remove the plastic cowling so that you can
see what you're doing. It's easy to damage the metal wire clip.
--- In
DSN_klr650@yahoogroups.com, "kenmcklr"
wrote:
>
> I'm new to the group and I need some advice. My 02 needs a
headlight
> bulb. To remove the old one it looks as if it plugs in. Can it be
> removed by pulling straight back on the dust cover or is there
> something I'm not seeing. Don't want to screw up. Thanks in advance
> for the help.
headlight bulb removal
Posted: Mon Oct 18, 2004 4:16 pm
by Giorgio Trucco
I replaced mine yesterday with the upgraded BP1210/h4 80/100W.
I also looked at the system with a dumb experession at the beginning,
but finally I figured it out.
First al all I unscrewed the plastic black vertical plate (lack of
better definition...).
I'm not sure this is strictly needed but it certainly helps.
Then you can unplug the rubber wrapped socket. It can be hard but some
lateral movents will get it loose.
At this point there is only a sort of rubber cup around the mechanism
that keeps the bulb in place.
Pull the rubber away (backward) to expose the retaining meachanism.
It's a bended piece of hardwire that is clipped on the right of the
light bulb.
Once you get visual access to the retaining mechanism by pulling the
rubber back, you'll figure out how to get the bulb free.
Hope this helps.
(written by an English as a second language speaker...)
Giorgio
-----Original Message-----
From: kenmcklr [mailto:ac247boxerken@...]
Sent: Monday, October 18, 2004 12:56 PM
To:
DSN_klr650@yahoogroups.com
Subject: [DSN_klr650] Headlight bulb removal
I'm new to the group and I need some advice. My 02 needs a headlight
bulb. To remove the old one it looks as if it plugs in. Can it be
removed by pulling straight back on the dust cover or is there something
I'm not seeing. Don't want to screw up. Thanks in advance for the help.
List sponsored by Dual Sport News at
www.dualsportnews.com. List FAQ
courtesy of Chris Krok at:
www.bigcee.com/klr650faq.html Unsubscribe by
sending a blank message to:
DSN_klr650-unsubscribe@yahoogroups.com .
Yahoo! Groups Links
headlight bulb removal
Posted: Mon Oct 18, 2004 7:39 pm
by Eric L. Green
On Mon, 18 Oct 2004, kenmcklr wrote:
> I'm new to the group and I need some advice. My 02 needs a headlight
> bulb. To remove the old one it looks as if it plugs in. Can it be
> removed by pulling straight back on the dust cover or is there
> something I'm not seeing. Don't want to screw up. Thanks in advance
> for the help.
There's a clip underneath that dust cover that has to be unclipped.
It's easiest if you take the fairing off (the turnsignal wires unclip at
the thick rubberized part), but taking the windshield and the little
plastic thingy off will give you enough room to work. Just pull off the
socket, pull back the rubber thingy, and you'll see the clip. Unclip the
clip, grab the bulb by the three prongs, and it comes right out. Make sure
you put the new bulb in the same way!
I replaced my OEM bulb with a 55/100 bulb (and upgraded my fuse to 15a of
course). The 55w low beam avoids blinding people in the city and avoids
running my battery down in the daytime, while the 100w bulb finally gives
me *LIGHT* at night. I don't give a flyin' flip if the 100w bulb annoys
people at night, I'd rather them be annoyed by me than not see me at
all...
_E
mud spud comes to ca
Posted: Tue Oct 19, 2004 12:32 am
by Jim
Well the first significant rains have come to central CA since early
spring and it's like welcoming back a long lost friend. Two KLRs
headed out of town after lunch today into a patchy cloudy sky after a
good soaking last night and into this morning. We rode east toward
the Sierras via the Kings River basin and onto a old back road that
rises out of the basin, over a ridge and down to Hwy 180. The dirt
road starts out rocky as it snakes up the canyon and into a tributary
wash. Soon more puddles appear as we traverse the hillside and the
soil begins to change from rocky to loam to red clay. Deer season is
underway and there have been one or two 4X4s on this road since the
rain. Sure enough I come around the bend and immediatly focus on a
huge rut in a long patch of the red clay. Without trying and before I
know it I am in the deep rut and without my permission my throttle
hand is rolling off the gas. In a instant I make contact with the red
menace as my bike goes over on it's side. No harm no foul and I am up
and on it while my partner takes full advantage of me pointing out the
rut and rolls cleanly off to one side. For the next few uphill miles
the red clay predominates and we are forced to employ the outrigers as
the tires load up and slide sideways. At one point the road slants
left and points up a steep section and the rear tires shift wildly
sideways with each blip of the throttle. We manage to get the bikes
back straight and roost enough of the clay to gain momentum up the
hill. The road darkens and soon a course loam soil provides better
drainage and better traction as we ride to the ridge line. From here
we come to an old logging operation and the roads have all had chipped
gravel road base applied making for some third grear uphill runs with
perfect traction and of course no dust, been a long summer of dusty
roads until today. More rain forcasted tonight.
--Jim
A-15