Wilsons Sandbox

> I notice a tab on the frame that looks like it once had a bolt

> through it but I can't tell what it's for. > > If you're on the right side of the bike, the tab is on the frame > behind the brake light spring, and it protrudes down from the

> at roughly five o'clock, ending just above the tailpipe. I'd say > there is maybe half an inch clearance between the tailpipe cover

> the end of the tab. > > Anyone know what it's for? > > Randy

--- In DSN_klr650@yahoogroups.com, "John" wrote: > --- In DSN_klr650@yahoogroups.com, "takes2serious" > wrote: > > I notice a tab on the frame that looks like it once had a bolt > going > > through it but I can't tell what it's for. > > > > If you're on the right side of the bike, the tab is on the frame > > behind the brake light spring, and it protrudes down from the > frame > > at roughly five o'clock, ending just above the tailpipe. I'd say > > there is maybe half an inch clearance between the tailpipe cover > and > > the end of the tab. > > > > Anyone know what it's for? > > > > Randy > -------------------------------- > I could be wrong because I am sitting in the office and not looking > at my bike but it could be the exhaust clamp mount. I lost the bolt > on mine and the ring around the pipe slid back toward the muffler. > Slide your fingers down the (cold) exhaust pipe and see if your > clamp is loose. > > John > A18

> That's funny John. That's exactly what it is. And I've got an A18 > also. Thanks for the tip.