Page 1 of 1

status

Posted: Tue Aug 24, 2004 1:59 pm
by veggirl1964@yahoo.com
are you the one? [Non-text portions of this message have been removed]

status

Posted: Tue Aug 24, 2004 2:33 pm
by Harry Seifert
Why, yes I am. or was until yesterday, but may not be until tomorrow.
> [Original Message] > From: > To: dsn_klr650@yahoogroups.com> > Date: 8/24/2004 12:00:03 PM > Subject: [DSN_klr650] Status > > > are you the one? > > > [Non-text portions of this message have been removed] > > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ
courtesy of Chris Krok at: www.bigcee.com/klr650faq.html
> Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > Yahoo! Groups Links > > > > > >

status

Posted: Tue Aug 24, 2004 3:49 pm
by Eduardo
Morpheous seems convinced of it, but the Oracle said I'm not... Neal.
--- In DSN_klr650@yahoogroups.com, veggirl1964@y... wrote: > are you the one? > > > [Non-text portions of this message have been removed]

95klr no lights?

Posted: Tue Aug 24, 2004 6:50 pm
by Mike Torst
-----Original Message----- From: RumbleFsh9 [mailto:rumblefsh9@...] Sent: Tuesday, August 24, 2004 9:22 AM To: DSN_klr650@yahoogroups.com Subject: [DSN_klr650] 95KLR no lights? My turn signal switch looked like it needed a professional adjustment ( lol) so i pulled it out and tried to fix what wasnt wrong with it.So i put it back together and it works fine but acts a little funny like i have to wiggle the switch but then it i get home from my buddies shop and go to take the bike out at night and i have no lights or turn signals or cluster lights....nada. Take the seat off the,fuse is blown and replace that, still no lights.....any quick thoughts? It had been raining pretty hard in the days previous to this happening so it might be a moisture issue,(I ride in whatever weather). Thanks in advance! -----reply--------------- Well, since the only thing you have had 'contact' with (ha-ha) is the switch assembly, I would guess the short is in the switch assembly, or the wire insulation is damaged inside the switch housing. Good luck, and don't forget your multimeter!~ Mike Torst Las Vegas