Page 1 of 1
klx needle and 136 main jet
Posted: Fri Mar 05, 2004 1:40 am
by gkc2us
Where can I buy the KLX carb needle and a 136 main jet? I looked on
Fred's site and only saw the Dynojet kit. I am getting ready to
order a bunch of goodies from Fred for the KLR to get it ready for
much more off road travel this spring and summer. I want to be able
to rejet the carb (for my riding altitude of 5000' ASL and above) and
change the needle at the same time as I am doing other mods.
TIA for any info you can provide, Greg
klx needle and 136 main jet
Posted: Fri Mar 05, 2004 9:01 am
by Devon
Ron Ayers (ronayers.com) can sell you the needle, clip, and washer.
They can also sell you Keihin main jets.
The 136mj is a Dynojet MJ number which corresponds to the stock 148
Keihin main jet. The 140 Dynojet MJ corresponds to a 150 Keihin MJ.
Keep in mind you will need to go LEANER as you gain altitude.
Devon
gcheney@... wrote:
>Where can I buy the KLX carb needle and a 136 main jet? I looked on
>Fred's site and only saw the Dynojet kit. I am getting ready to
>order a bunch of goodies from Fred for the KLR to get it ready for
>much more off road travel this spring and summer. I want to be able
>to rejet the carb (for my riding altitude of 5000' ASL and above) and
>change the needle at the same time as I am doing other mods.
>
>
>
klx needle and 136 main jet
Posted: Fri Mar 05, 2004 11:55 am
by gkc2us
Thanks for the info Devon. Since the 136MJ is the same as stock I
will stay with stock for now. The bike runs fine up to 14,000'+ ASL
so I will just change the jet and move the screw out 2.5 turns.
Since this is on a '93 "Barbie Bike" the screw might be OK. I will
check it once I start working on the carb. I will call Ron Ayers and
get the needle etc. on order.
We got snow last night and this morning but are supposed to be in the
50s this weekend and 60s Mon and Tue. I will believe it when I see
it:)
Take care and ride safe but fast, Greg
> Ron Ayers (ronayers.com) can sell you the needle, clip, and
washer.
> They can also sell you Keihin main jets.
>
> The 136mj is a Dynojet MJ number which corresponds to the stock 148
> Keihin main jet. The 140 Dynojet MJ corresponds to a 150 Keihin MJ.
>
> Keep in mind you will need to go LEANER as you gain altitude.
>
> Devon
>
> gcheney@u... wrote:
>
> >Where can I buy the KLX carb needle and a 136 main jet? I looked
on
> >Fred's site and only saw the Dynojet kit. I am getting ready to
> >order a bunch of goodies from Fred for the KLR to get it ready for
> >much more off road travel this spring and summer. I want to be
able
> >to rejet the carb (for my riding altitude of 5000' ASL and above)
and
> >change the needle at the same time as I am doing other mods.
> >
> >
> >
nklr make your own biodiesel ( pdf)
Posted: Sat Mar 06, 2004 1:35 am
by Mike Torst
You diesel guys crack me up

Mike Torst
Las Vegas
> -----Original Message-----
> From: Svantwuyver [mailto:svantwuyver@...]
> Sent: Thursday, March 04, 2004 11:03 PM
> To: vegasklr@...
> Subject: RE: NKLR Make your own biodiesel ( PDF)
>
> Been there, got one:
>
>
http://users.tns.net/~stevevt/TengaiDiesel.jpg
>
> It's for sale too. It's listed in the classifieds on:
>
>
www.dualsportnews.com
>
> For $2400 I'll drive it to Vegas and fly back. Can be
> done on half a tank.
>
> -svt-
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Search - Find what you're looking for faster
>
http://search.yahoo.com