gotta sell

[RS]

I want to splice into the stop lamp wiring so I can attach my GIVI's top case high mounted stop lamps to it. There are 3 wires going into the tail light: red, blue and black. Black must be the ground, so which is of the other 2 is the stop lamp? One of them must be for the running lamp and one for the stop. Any idea? I know it's 50/50 ! Thanks a lot!

[Don Kime]

At 11:29 PM 2/25/2004 -0500, RS wrote:

>There are 3 wires going into the tail >light: red, blue and black. Black must be the ground, so which is of the >other 2 is the stop lamp? One of them must be for the running lamp and one >for the stop. Any idea? I know it's 50/50 ! Thanks a lot!

An owner's manual or Clymer should answer this. Another trick is to put a sewing needle through the insulation, and then use a voltmeter to find which is which. I've done the very thing you're wanting to do, but I don't recall. Ride safe, Don Kime - VFR750F, GL1500SE, GL1100, KLR 650 OH - M/C Safety Instructor/RiderCoach dkime@... http://forums.delphiforums.com/MCTourer/

[dumbazz650]

--- In DSN_klr650@yahoogroups.com, RS wrote:

> I want to splice into the stop lamp wiring so I can attach my

GIVI's top

> case high mounted stop lamps to it. There are 3 wires going into

the tail

> light: red, blue and black. Black must be the ground, so which is

of the

> other 2 is the stop lamp? One of them must be for the running lamp

and one

> for the stop. Any idea? I know it's 50/50 ! Thanks a lot!

Prof Jim knew that one day, you would be posting here, looking for this crucial piece of information. Although we have not heard from Jim in some time, he did entrust us, the keepers of the KLR flame, with safeguarding the last remaining full color copy of the KLR schematic. You can get it here on the Yahoo DSNKLR650 web site ... http://tinyurl.com/wf5a Use the FAQ Luke: www.bigcee.com/klr650faq.html MarkB

[n4lj]

--- In DSN_klr650@yahoogroups.com, RS wrote:

> I want to splice into the stop lamp wiring so I can attach my

GIVI's top

> case high mounted stop lamps to it. There are 3 wires going into

the tail

> light: red, blue and black. Black must be the ground, so which is

of the

> other 2 is the stop lamp? One of them must be for the running lamp

and one

> for the stop. Any idea? I know it's 50/50 ! Thanks a lot!

How about disconnect one of the wires and see what stops working Jim A17 Lexington, Ky.

[martig]

Anybody interested in a 2001 A15 with 5722 miles in the Savannah, TN area? Great condition. Mostly stock except JC Whitney tail trunk and new Duro rear tire. Lost my job & gotta move. $3,150. A15