Wilsons Sandbox
http://www.frenchandlogan.com/phpBB3/
http://www.frenchandlogan.com/phpBB3/viewtopic.php?f=52&t=240506
27mm socket for the STOCK nut 30mm socket for the Sagebrush Machine Shop prevailing torque nut On the chain, you can just cut the old one off, dremel through links or rivet heads, etc. If you're going to reinstall a riveted chain, rather than use a master link type of setup, then you'll have to remove the swingarm to get the chain in there... Follow the appropriate steps in this swingarm maintenance procedure to get it removed, if you need to remove it: http://klr6500.tripod.com/swingarm.htm Mark KLR650 Motorcycle Pages: http://klr6500.tripod.com/ Jaicori Photography: http://www.jaicoriphotography.com/> I have a 2000 KLR 650. Can some someone tell me what size(mm) the > countershaft nut is that holds the spocket on the engine? Any other > input regarding chaning the chain would be helpful.
----- Original Message ----- From: "ric fontana" To: DSN_klr650@yahoogroups.com> Sent: Sunday, October 12, 2003 8:54 PM Subject: [DSN_klr650] Need Copper Canyon Waypoints > Does anyone have waypoints in the bottom of the copper > canyon. I have been to Batopillas several times but > now would like to go from there to Urique and was > hoping someone had the waypoints. Any other points > within the bottom of the canyon would also be helpful. > > thanks, r > > __________________________________ > Do you Yahoo!? > The New Yahoo! Shopping - with improved product search > http://shopping.yahoo.com > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >