fork springs, spacers and oil level...
Posted: Mon Aug 25, 2003 9:50 pm
OK... here's the scoop; I purchased LR Progressive Fork Springs
for my A12 from the good folks at Happy Trails in Boise, and they
arrived with pre-cut 2.75" spacers. My understanding was that
spacers for these springs should be 2.00". I called the folks at
Happy Trails, and while 2.00" spacers are the "norm", they prefer
to supply 2.75" spacers for added pre-load on the springs.
So here's my question... for 80/20 street to trail riding, what
weight oil should I be using? I originally planned on 10wt but the
added pre-load may warrant lighter oil. Also, due to the longer
spacers, does the 190mm oil level still apply, or should I reduce
the oil level to compensate for increased displacement caused
by the longer spacers? Any insight would be much appreciated!!
Thanks All...
Rhody Joe
A12 RoboThumper