Page 1 of 1

barsnake

Posted: Tue Oct 03, 2000 9:33 pm
by Luke
Does anyone tried Barsnake to reduce handlebar vibration?

barsnake

Posted: Mon Jun 30, 2003 1:57 pm
by Bill Smith
Anybody ever taken a barsnake out of a stock handlebar? If so, if you can offer any tips it would be appreciated. I haven't found it to work so I am going to take it out (I hope) TIA, Bill in Cypress, Texas A15

barsnake

Posted: Mon Jun 30, 2003 2:04 pm
by Karl Juengel
I once had a pesky viper take up residence in my handlebars. I found compressed air removed it quite well. Not sure that will work with your particular species though. good luck! Karl A14 on 6/30/03 2:57 PM, Bill Smith at kendoman@... wrote:
> Anybody ever taken a barsnake out of a stock handlebar? If so, if you can > offer any tips it would be appreciated. > > I haven't found it to work so I am going to take it out (I hope) > > TIA, > Bill in Cypress, Texas > A15 > > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy > of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

barsnake

Posted: Mon Jun 30, 2003 2:05 pm
by Mark St.Hilaire, Sr
> Anybody ever taken a barsnake out of a stock handlebar? If so, if you can > offer any tips it would be appreciated. > > I haven't found it to work so I am going to take it out (I hope)
Bill, I haven't actually done this, haven't even seen a barsnake "in person," but here are a couple shots in the dark. Maybe you could: Push it through from the throttle grip side with a coat hanger, or something like that? Securely tape a screw to the head of a screwdriver, screw the screw into the barsnake, and then just pull it back? Mark KLR650 Motorcycle Pages: http://klr6500.tripod.com/ HomePage: http://home.adelphia.net/~msaint/index.html My Adelphia Email can be "iffy." If you don't get a response, please try: KLR6500@...

barsnake

Posted: Mon Jun 30, 2003 2:15 pm
by mugga112001
Ok, this might be a totally silly question, but what is a Barsnake?
--- In DSN_klr650@yahoogroups.com, "Bill Smith" wrote: > Anybody ever taken a barsnake out of a stock handlebar? If so, if you can > offer any tips it would be appreciated. > > I haven't found it to work so I am going to take it out (I hope) > > TIA, > Bill in Cypress, Texas > A15

barsnake

Posted: Mon Jun 30, 2003 2:18 pm
by Mark St.Hilaire, Sr
> Ok, this might be a totally silly question, but what is a Barsnake?
Not at all, it reduces handlebar vibrations: http://www.barsnake.com/home.html Mark KLR650 Motorcycle Pages: http://klr6500.tripod.com/ HomePage: http://home.adelphia.net/~msaint/index.html My Adelphia Email can be "iffy." If you don't get a response, please try: KLR6500@...

back on list - red for 2004!/ klr wanted in nm

Posted: Mon Jun 30, 2003 2:37 pm
by roadkill_db
I actually went down to a dealer this weekend to look and see if they had one in stocker yet. No 650's, but a 250. It's a dark, burnt looking Red/almost a Maroon. I thought it looked pretty good in person, more sporty then the green....
--- In DSN_klr650@yahoogroups.com, "BKLR" wrote: > It's not RED but a VERY HOT PINK! > > BKLR > embarrassed oregon native > > > > You guys discussed the 2004 RED klr 650 yet? > > > > Now I'm liking the green I never liked before. > > > > I'm looking for a low mileage KLR650 in or near NM.