Page 1 of 1

swingarm lateral movement ?

Posted: Tue Jun 24, 2003 6:01 pm
by klr6501995
Hello listers, How much lateral movement do yall get from the swingarm ? When my bike is on the lift and I grip the swingarm next to the rear axle and other hand on the subfram and push-pull the swingarm I get maybe 1/16 - 3/16' inch movement. Kinda sloppy if you ask me. Are my needle bearings going bad ? I did lube it all at 14,000mi wich was about 3000mi ago. Reused everything.

swingarm lateral movement ?

Posted: Tue Jun 24, 2003 6:10 pm
by Judson D. Jones
There should be no play. --- In DSN_klr650@yahoogroups.com, "klr6501995" wrote:
> Hello listers, > > How much lateral movement do yall get from the swingarm ? > > When my bike is on the lift and I grip the swingarm next to the
rear
> axle and other hand on the subfram and push-pull the
swingarm I get
> maybe 1/16 - 3/16' inch movement. Kinda sloppy if you ask me. > > Are my needle bearings going bad ? > > I did lube it all at 14,000mi wich was about 3000mi ago.
Reused
> everything.

swingarm lateral movement ?

Posted: Tue Jun 24, 2003 9:14 pm
by kdxkawboy@aol.com
You bike is yelling disassemble, disassemble! I am sick. Tear me down and repair. In a message dated 2003-06-24 4:16:23 PM Pacific Daylight Time, judjonzz@... writes:
> > There should be no play. > > --- In DSN_klr650@yahoogroups.com, "klr6501995" > wrote: > >Hello listers, > > > >How much lateral movement do yall get from the swingarm ? > >When my bike is on the lift and I grip the swingarm next to the rear > >axle and other hand on the subfram and push-pull the swingarm I get > >maybe 1/16 - 3/16' inch movement. Kinda sloppy if you ask me. > > > >Are my needle bearings going bad ? I did lube it all at 14,000mi wich was > about 3000mi ago. Reused everything. > >
[Non-text portions of this message have been removed]

quality of klr650's built in thailand

Posted: Wed Jun 25, 2003 8:13 pm
by bugeyebandit1
Has anyone had more or less problems with their KLR manufactured in Thailand compared to a Japanese built bike? Exacty when did Kawasaki start building the KLR650 there?