nklr: tubeless tires
Posted: Thu Jun 19, 2003 3:44 pm
There is no problem running tubes in a tubeless tire, right?
Wilsons Sandbox
http://www.frenchandlogan.com/phpBB3/
http://www.frenchandlogan.com/phpBB3/viewtopic.php?f=52&t=238243
Right ! Bogdan> There is no problem running tubes in a tubeless tire, right? >
It drops the speed range by 1 grade. Since the KLR might eventually wheeze and stumble it's way up to 100mph or so (no, just because your speedo said 110 doesn't mean you were going that fast) it's totally irrelevant. Tubes in tubeless tires on KLRs are fine. Devon -- "It's a troublesome world, all the people who are in it, are troubled with troubles almost every minute" Dr. Seuss> > There is no problem running tubes in a tubeless tire, right? >
--- In DSN_klr650@yahoogroups.com, Devon Jarvis wrote: > > > TM1669@c... wrote: > > > > There is no problem running tubes in a tubeless tire, right? > > > > It drops the speed range by 1 grade. Since the KLR might > eventually wheeze and stumble it's way up to 100mph or so > (no, just because your speedo said 110 doesn't mean you were > going that fast) it's totally irrelevant. Tubes in tubeless > tires on KLRs are fine. > > Devon > > -- > "It's a troublesome world, > all the people who are in it, > are troubled with troubles > almost every minute" > > Dr. Seuss
--- In DSN_klr650@yahoogroups.com, "westnash1" wrote: > If anyone has figured out how to run tubless tires successfully on > the KLR I would like to learn more. > > > > --- In DSN_klr650@yahoogroups.com, Devon Jarvis wrote: > > > > > > TM1669@c... wrote: > > > > > > There is no problem running tubes in a tubeless tire, right? > > > > > > > It drops the speed range by 1 grade. Since the KLR might > > eventually wheeze and stumble it's way up to 100mph or so > > (no, just because your speedo said 110 doesn't mean you were > > going that fast) it's totally irrelevant. Tubes in tubeless > > tires on KLRs are fine. > > > > Devon > > > > -- > > "It's a troublesome world, > > all the people who are in it, > > are troubled with troubles > > almost every minute" > > > > Dr. Seuss
--- In DSN_klr650@yahoogroups.com, "klr6501995" wrote: > Folks do it all the time. > Everbody usually uses tubes in them though. > > It was said a rider used silicon to seal the rims. and ran w/o tubes. > > Not me. Seem that centrifigul(sp) force would really cause a problem > with silicone flying out of the rim. jmho. > > --- In DSN_klr650@yahoogroups.com, "westnash1" wrote: > > If anyone has figured out how to run tubless tires successfully on > > the KLR I would like to learn more. > > > > > > > > --- In DSN_klr650@yahoogroups.com, Devon Jarvis > wrote: > > > > > > > > > TM1669@c... wrote: > > > > > > > > There is no problem running tubes in a tubeless tire, right? > > > > > > > > > > It drops the speed range by 1 grade. Since the KLR might > > > eventually wheeze and stumble it's way up to 100mph or so > > > (no, just because your speedo said 110 doesn't mean you were > > > going that fast) it's totally irrelevant. Tubes in tubeless > > > tires on KLRs are fine. > > > > > > Devon > > > > > > -- > > > "It's a troublesome world, > > > all the people who are in it, > > > are troubled with troubles > > > almost every minute" > > > > > > Dr. Seuss
> not to mention the fact that you're gonna have a hell of a time > putting it back on the rim when you flatten it in the middle of > nowhere and it comes off the bead. Leave well enough alone. PUt in > a monster tube, slime it and ride. > millerized > > > --- In DSN_klr650@yahoogroups.com, "klr6501995" wrote: > > Folks do it all the time. > > Everbody usually uses tubes in them though. > > > > It was said a rider used silicon to seal the rims. and ran w/o > tubes. > > > > Not me. Seem that centrifigul(sp) force would really cause a > problem > > with silicone flying out of the rim. jmho. > > > > --- In DSN_klr650@yahoogroups.com, "westnash1" > wrote: > > > If anyone has figured out how to run tubless tires successfully > on > > > the KLR I would like to learn more. > > > > > > > > > > > > --- In DSN_klr650@yahoogroups.com, Devon Jarvis > > wrote: > > > > > > > > > > > > TM1669@c... wrote: > > > > > > > > > > There is no problem running tubes in a tubeless tire, right? > > > > > > > > > > > > > It drops the speed range by 1 grade. Since the KLR might > > > > eventually wheeze and stumble it's way up to 100mph or so > > > > (no, just because your speedo said 110 doesn't mean you were > > > > going that fast) it's totally irrelevant. Tubes in tubeless > > > > tires on KLRs are fine. > > > > > > > > Devon > > > > > > > > -- > > > > "It's a troublesome world, > > > > all the people who are in it, > > > > are troubled with troubles > > > > almost every minute" > > > > > > > > Dr. Seuss
--- In DSN_klr650@yahoogroups.com, "Dooden" wrote: > Or you can "shove" a plug in it, air it up and hardly get your hands > dirty.. and be rolling again in a few minutes. > > Just the other side of the coin talking. > > Dooden > A15 Green Ape > > > > --- In DSN_klr650@yahoogroups.com, "James L. Miller Jr." > wrote: > > not to mention the fact that you're gonna have a hell of a time > > putting it back on the rim when you flatten it in the middle of > > nowhere and it comes off the bead. Leave well enough alone. PUt in > > a monster tube, slime it and ride. > > millerized > > > > > > --- In DSN_klr650@yahoogroups.com, "klr6501995" wrote: > > > Folks do it all the time. > > > Everbody usually uses tubes in them though. > > > > > > It was said a rider used silicon to seal the rims. and ran w/o > > tubes. > > > > > > Not me. Seem that centrifigul(sp) force would really cause a > > problem > > > with silicone flying out of the rim. jmho. > > > > > > --- In DSN_klr650@yahoogroups.com, "westnash1" > > wrote: > > > > If anyone has figured out how to run tubless tires successfully > > on > > > > the KLR I would like to learn more. > > > > > > > > > > > > > > > > --- In DSN_klr650@yahoogroups.com, Devon Jarvis > > > wrote: > > > > > > > > > > > > > > > TM1669@c... wrote: > > > > > > > > > > > > There is no problem running tubes in a tubeless tire, right? > > > > > > > > > > > > > > > > It drops the speed range by 1 grade. Since the KLR might > > > > > eventually wheeze and stumble it's way up to 100mph or so > > > > > (no, just because your speedo said 110 doesn't mean you were > > > > > going that fast) it's totally irrelevant. Tubes in tubeless > > > > > tires on KLRs are fine. > > > > > > > > > > Devon > > > > > > > > > > -- > > > > > "It's a troublesome world, > > > > > all the people who are in it, > > > > > are troubled with troubles > > > > > almost every minute" > > > > > > > > > > Dr. Seuss
a> After helping a friend change his R1150GS road tires to TKC-80's at
seat> campground, I can tell you that the old tubeless tires came off > easily, and the new ones went on easily. But getting the bead to
> so we could get air in wasn't so easy. His 12v air compressor > wouldn't do it, and all of our squeezing, whamming, and sitting on > the tires was for naught. Good thing there was a gas station with a > real air compressor nearby. > > __Arden > > > > > > > > > > --- In DSN_klr650@yahoogroups.com, "James L. Miller Jr." > > wrote: > > > not to mention the fact that you're gonna have a hell of a time > > > putting it back on the rim when you flatten it in the middle of > > > nowhere and it comes off the bead. Leave well enough alone. > > >
[...] Yeah, a car distributor with innards hosed with WD40 can make an interesting blue flame around the base of the dizzy cap when you start the car, but it takes a little while for the WD40 to get churned up by the shaft and weights first. Mister_T Melbourne Australia> They too had the > problem of getting the bead to seat but came up with a brillant > idea. They sprayed some WD40 into the tire, then using a lighter and > the WD40 can (like a flame thrower) ignited the fumes in the tire, > which combusted and inflated the tire and seated the bead.