Page 1 of 1
balancer chain noise - new a17
Posted: Sun Jun 01, 2003 6:35 pm
by cdn_flyboy2003
Hello all,
I've been subscribing to this list for about a month but this is my
first post. Among other web resources this list has provided me
with the information necessary to decide to purchase a KLR650.
I live in Yellowknife, Canada and had to buy the bike for Edmonton,
and have it shipped up.( A 1500km journey). The bike came intact
with some mods that I had the dealer ad. (Progressive front springs,
steel brake line, Moose bash plate, IMS shifter). What a great day!
After studying the manual I checked all the fluids etc, I started
her up. After a moment or two I notice a bit of chain type noise
comming from the balancer chain area. Is a bit of noise normal for
the KLR? It is not that loud but you can hear it at idle when
seated on the bike, thought you must really listen for it.
Any comments on this would be greatly apreciated.
Thanks,
Rob Gagn
Yellowknife, Canada
balancer chain noise - new a17
Posted: Sun Jun 01, 2003 8:39 pm
by hens_p
--- In
DSN_klr650@yahoogroups.com, "cdn_flyboy2003"
wrote:
>After a moment or two I notice a bit of chain type noise
> comming from the balancer chain area. Is a bit of noise normal for
> the KLR? It is not that loud but you can hear it at idle when
> seated on the bike, thought you must really listen for it.
The KLR motor rattles a bit so some noise is normal. Of course, I
can't hear the bike but I would guess that all is okay. It may get
even quieter after some smooth break in.
Pat
balancer chain noise - new a17
Posted: Mon Jun 09, 2003 7:57 am
by cdn_flyboy2003
Hello all,
I've been subscribing to this list for about a month but this is my
first post. Among other web resources this list has provided me
with the information necessary to decide to purchase a KLR650.
I live in Yellowknife, Canada and had to buy the bike for Edmonton,
and have it shipped up.( A 1500km journey). The bike came intact
with some mods that I had the dealer ad. (Progressive front springs,
steel brake line, Moose bash plate, IMS shifter). What a great day!
After studying the manual I checked all the fluids etc, I started
her up. After a moment or two I notice a bit of chain type noise
comming from the balancer chain area. Is a bit of noise normal for
the KLR? It is not that loud but you can hear it at idle when
seated on the bike, thought you must really listen for it.
Any comments on this would be greatly apreciated.
Thanks,
Rob Gagn
Yellowknife, Canada
balancer chain noise - new a17
Posted: Mon Jun 09, 2003 7:57 am
by cdn_flyboy2003
Hello all,
I've been subscribing to this list for about a month but this is my
first post. Among other web resources this list has provided me
with the information necessary to decide to purchase a KLR650.
I live in Yellowknife, Canada and had to buy the bike for Edmonton,
and have it shipped up.( A 1500km journey). The bike came intact
with some mods that I had the dealer ad. (Progressive front springs,
steel brake line, Moose bash plate, IMS shifter). What a great day!
After studying the manual I checked all the fluids etc, I started
her up. After a moment or two I notice a bit of chain type noise
comming from the balancer chain area. Is a bit of noise normal for
the KLR? It is not that loud but you can hear it at idle when
seated on the bike, thought you must really listen for it.
Any comments on this would be greatly apreciated.
Thanks,
Rob Gagn
Yellowknife, Canada
balancer chain noise - new a17
Posted: Mon Jun 09, 2003 9:05 am
by Bogdan Swider
> After a moment or two I notice a bit of chain type noise
> comming from the balancer chain area. Is a bit of noise normal for
> the KLR? It is not that loud but you can hear it at idle when
> seated on the bike, thought you must really listen for it.
>
>
From your description I think your bike is perfectly normal - for better
and worse. However, it does depend on what you mean by " a bit of noise ".
I would plan on a doohickey and spring upgrade.
Bogdan
balancer chain noise - new a17
Posted: Mon Jun 09, 2003 12:37 pm
by xs650@dejazzd.com
Kurt,
Look at the dates on both of the posts from the following subscriber. Any idea as to why these posts were generated to the list again?
I rememeber these specifically because I replied to him, and because he's from waaaaayyyyy up in the NWT.
Eric in Pa
>
> From: "cdn_flyboy2003"
> Date: 2003/06/01 Sun PM 03:12:04 EDT
> To:
DSN_klr650@yahoogroups.com
> Subject: [DSN_klr650] Balancer Chain Noise - new A17
>
> Hello all,
>
> I've been subscribing to this list for about a month but this is my
> first post. Among other web resources this list has provided me
> with the information necessary to decide to purchase a KLR650.
>
> I live in Yellowknife, Canada and had to buy the bike for Edmonton,
> and have it shipped up.( A 1500km journey). The bike came intact
> with some mods that I had the dealer ad. (Progressive front springs,
> steel brake line, Moose bash plate, IMS shifter). What a great day!
>
> After studying the manual I checked all the fluids etc, I started
> her up. After a moment or two I notice a bit of chain type noise
> comming from the balancer chain area. Is a bit of noise normal for
> the KLR? It is not that loud but you can hear it at idle when
> seated on the bike, thought you must really listen for it.
>
> Any comments on this would be greatly apreciated.
>
> Thanks,
>
> Rob Gagn
> Yellowknife, Canada
>
>
>
>
>
>
> List sponsored by Dual Sport News at
www.dualsportnews.com. List FAQ courtesy of Chris Krok at:
www.bigcee.com/klr650faq.html
> Unsubscribe by sending a blank message to:
>
DSN_klr650-unsubscribe@yahoogroups.com .
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
help with diagnoses
Posted: Mon Jun 09, 2003 5:04 pm
by zootpatutie
Since you mentioned carburator rebuild is it possible that the
enrichener is stuck partially on? Tear in the diaphragm during
reassembly? Stuck float needle? Did the float hinge bracket get
bent and increase the float level in the bowl? And yes, check the
valves.
Good luck.
Todd