Page 1 of 1
nklr speed
Posted: Mon Jan 15, 2001 1:26 pm
by Dale_Johnson@ahm.honda.com
How fast am I?
(Embedded image moved to file: pic04002.pcx)
nklr speed
Posted: Mon Jan 15, 2001 1:49 pm
by klrbud@aol.com
A lot faster than me. I am at 40k
Kurt Thomas
Welcome to the Thomas Homepage
nklr speed
Posted: Mon Jan 15, 2001 3:55 pm
by Peter Berghs
For what its worth, my cable connection is running at 1906 kbps, 233.6 k
bytes/sec, at 14:00 hours today
PB
klrbud@... wrote:
>
> A lot faster than me. I am at 40k
>
> Kurt Thomas
> Welcome to the Thomas Homepage
>
nklr speed
Posted: Thu Apr 26, 2001 4:03 pm
by Andy Cohen
speed is one thing but they way two KLRs sound with "race" style exhausts
running WFO at 9PM is music to my ears. Just gotta be careful you dont get
a ticket...right Dale?
Dale and I will appearing before a judge on the 15th of may to plead our
case.
Andy Cohen
Finishlinewest
Home of the 470 HP "Quake"
Kawasaki KLR 650 Police Special
www.finishlinewest.com
"our vehicles don't compete with other vehicles, they compete with sex"
nklr speed
Posted: Thu Apr 26, 2001 4:13 pm
by Dale_Johnson@ahm.honda.com
I'll be there too.. Did you notice that it says on or before? What if
you show up and he isn't there?
Dale
P.S. Did you look through that CD? it had drivers Licences/pasports
etc.. on it..
--- In DSN_klr650@y..., "Andy Cohen" wrote:
> speed is one thing but they way two KLRs sound with "race" style
exhausts
> running WFO at 9PM is music to my ears. Just gotta be careful you
dont get
> a ticket...right Dale?
>
> Dale and I will appearing before a judge on the 15th of may to
plead our
> case.
>
>
> Andy Cohen
>
> Finishlinewest
> Home of the 470 HP "Quake"
> Kawasaki KLR 650 Police Special
>
>
www.finishlinewest.com
> "our vehicles don't compete with other vehicles, they compete with
sex"
front wheel bearings starting to go
Posted: Mon Sep 23, 2002 8:55 am
by Zachariah Mully
For those of us without a local supplier, I have had great service from
the guys at Johnson Bearing,
http://www.bearing-johnson.com, I ordered
all the bearings and seals for my Vespa engine rebuild and paid about
25-50% of what OEM would have been for the bearings. When you do talk to
them make sure that you specify NON-chinese bearings... Tell them that
you want only name brand stuff like SKF, FAG, Timken, etc. and they'll
get whatever you need at really good prices.
Z
DC
On Mon, 2002-09-23 at 09:47, Devon Jarvis wrote:
> I just replaced the rear wheel bearings on my A15. It happens all the
> time, bearings are a consumeable like brake pads or clutch plates.
> They're a lot cheaper though, search the list archives for the metric
> bearing numbers, and call around- you might find someplace local that
> has them in stock. Most people replace the bearings with double-sealed,
> unlike the stock bearings which have seals on only one side.
>
> Devon