Wilsons Sandbox

No risotto, It's okay. I run all my cables along the exhaust. That way after they have melted and stuck to it, I know they won't fall off. Dave risotto67 wrote:Hello, I installed a new clutch cable on my A13 this morning, but I think I did not route it properly. At its base, it now slightly makes contact with the exhaust pipe. Not too too good, huh? Thanks, jp Checkout Dual Sport News at http://www.dualsportnews.com List FAQ courtesy of Chris Krok at: http://www.bigcee.com/klr650faq.html Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ --------------------------------- Do you Yahoo!? Yahoo! News - Today's headlines [Non-text portions of this message have been removed]

Is it routed down the front frame and then between the water hoses connecting the water pump? It should go right in between them, not over them. Good luck. -Rick

----- Original Message ----- From: "risotto67" To: DSN_klr650@yahoogroups.com> Sent: Wednesday, September 18, 2002 10:50 AM Subject: [DSN_klr650] Clutch cable routing - help needed. > Hello, > > I installed a new clutch cable on my A13 this morning, but I think I > did not route it properly. At its base, it now slightly makes > contact with the exhaust pipe. Not too too good, huh? > > > Thanks, > jp > > > Checkout Dual Sport News at http://www.dualsportnews.com List FAQ courtesy of Chris Krok at: http://www.bigcee.com/klr650faq.html > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >