Wilsons Sandbox

Posted: **Sun Jul 14, 2002 12:26 pm**

I installed a Center-stand and noted that the triple clamps on my (previously owned) KLR were lowered. I raised them to spec (fork tops even with the t-clamps), but now suspect the previous owner may have installed lowering links. So, How can I tell? What is the stock length of these bones and, in case I need to get the OEMs, is anyone willing to part with theirs? Thanks, Todd (Springfield, VA)

Posted: **Sun Jul 14, 2002 12:35 pm**

At 4:19 PM +0000 7/14/2002, Conall O'Brien wrote:

>I use www.ofoto.com. ,... but now they require everyone to login to view. I >like them 'cause there are no bandwidth limits like I've seen on yahoo. Any >other good free places for alternatives?

Don't most ISPs include something like 25MB of webspace with your dialup or high-speed accounts? My job gives me a free dailup account and 50MB. One of the few perks that balances out the monthly parking fee rape. Mark B2 A2 A3

Posted: **Sun Jul 14, 2002 2:23 pm**

the bolt center to center dim. i got for the dog bones is approx. 126.5mm(measured on bike) when in doubt... B. Jr.

--- In DSN_klr650@y..., "Combat_Tourer" wrote: > I installed a Center-stand and noted that the triple clamps on my > (previously owned) KLR were lowered. I raised them to spec (fork > tops even with the t-clamps), but now suspect the previous owner may > have installed lowering links. > > So, How can I tell? What is the stock length of these bones and, in > case I need to get the OEMs, is anyone willing to part with theirs? > > Thanks, > > Todd (Springfield, VA)

Wilsons Sandbox

nklr-website choice for posting pix

dog bones question

nklr-website choice for posting pix

dog bones question