Wilsons Sandbox

Posted: **Tue Aug 07, 2001 4:14 pm**

I'm trying to get some feedback on the different oversized front rotors available for the KLR. MAP Engineering & Galfer both make one. Any first-hand experience out there? Also, has anyone tried the fork brace from Tim Bernard? Thank You.

Posted: **Tue Aug 07, 2001 4:39 pm**

At 09:13 PM 8/7/01 +0000, nalamosnar@... wrote:

>I'm trying to get some feedback on the different oversized front >rotors available for the KLR. MAP Engineering & Galfer both make one. >Any first-hand experience out there? Also, has anyone tried the fork >brace from Tim Bernard? Thank You. > > >Visit the KLR650 archives at

Have the MAP. It works very well. Highly recommended. -Tom '96 KLR 650 50,100 miles

Posted: **Wed Aug 08, 2001 10:57 am**

Yup! I have both (M.A.P. Eng. and the fork brace and IMO they are...The rotor and standoff-bracket are outstanding. Use the green Gal. pads for the front and the black for the back brake. A very well made part. The brace is outstanding engineering. Use blue locktight on every bolt on it and all of the other nuts and bolts on the bike. You can get these items from Fred @ Arrowhead Motorsports. VR Tom

----- Original Message ----- From: To: DSN_klr650@yahoogroups.com> Sent: Tuesday, August 07, 2001 5:13 PM Subject: [DSN_klr650] Oversized Rotors > I'm trying to get some feedback on the different oversized front > rotors available for the KLR. MAP Engineering & Galfer both make one. > Any first-hand experience out there? Also, has anyone tried the fork > brace from Tim Bernard? Thank You. > > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > > Post message: DSN_klr650@yahoogroups.com > Subscribe: DSN_klr650-subscribe@yahoogroups.com > Unsubscribe: DSN_klr650-unsubscribe@yahoogroups.com > List owner: DSN_klr650-owner@yahoogroups.com > > Support Dual Sport News by subscribing at: > http://www.dualsportnews.com > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

Posted: **Wed Aug 08, 2001 11:08 am**

I've got a lot of writing to get done in the next month, so I'll be going logging off for a bit. Hope to check in on the web site occasionally. Ralph Ralph E. Hanson rhanson40@... 99 KRL 650 http://www.wvu.edu/~journal2/west

Wilsons Sandbox

logging out for a bit

oversized rotors

oversized rotors

oversized rotors

logging out for a bit