Page 1 of 2
juice it!
Posted: Thu Jul 19, 2001 4:56 pm
by svnorcal@yahoo.com
I am a new KLR650 owner. Just picked up an a8 with 3500 miles. I've
been scanning many of the posts and do not see anything regarding
juicing up the power. Is this not done to the klr? I just took off a
Supertrapp race pipe with 20 discs and replaced with a quiet ids2 with
8. I'm a little disappointed that when I crank the throttle, front
wheel rises about an inch off the ground. Not much response. Otherwise
the bike feels very smooth, I feel like I am floating. Saddle, pegs
and bars are very comfortable, like lounging on a sofa.
juice it!
Posted: Thu Jul 19, 2001 5:26 pm
by k650dsn@aol.com
--- In DSN_klr650@y..., svnorcal@y... wrote:
> I am a new KLR650 owner. Just picked up an a8 with 3500 miles.
I've
> been scanning many of the posts and do not see anything regarding
> juicing up the power. Is this not done to the klr?
IMHO, the KLR just doesn't respond well to hotrodding tricks. Most go
for a piep and jet kit and leave it at that, mainly because you get
minimal gain and maximum loss of economy. I mildly jetted mine and
have a quiet pipe and am pleased with the power, but my fuel economy
sucks for a 650 single. I will usually net about 48-50mpg. My
ZRX1100 will routinely haul in 52-55 mpg.
Gino
juice it!
Posted: Thu Jul 19, 2001 9:21 pm
by Harry Thames
Someone (not me, I'm happy with 35HP) should try nitrous oxide in their KLR.
Its probably the cheapest way to get an extra 100 HP. An air shifter would
be nice, too.
Harry Thames
South Carolina
juice it!
Posted: Fri Jul 20, 2001 12:06 pm
by tismybutt@yahoo.com
I know what your saying. In fact there are people here who just don't
understand why you would want a louder pipe! The White Brotheres
catalog has some performance parts, but to get any power out of the
KLR your gonna need some compression. Next comes air flow in and out,
some have put on the 38mm Mikuni, but I'm trying to see if the HD 40
or 42 HSR Mikuni will be of benefit. It would probably kill the
bottom end, but then we do need to make sacrifices.
Personally, I'm keeping mine close to stock until the cyl wears out,
then it's time for a high comp big bore/cam. To Hell with reliability
and gas milage!
--- In DSN_klr650@y..., svnorcal@y... wrote:
> I am a new KLR650 owner. Just picked up an a8 with 3500 miles.
I've
> been scanning many of the posts and do not see anything regarding
> juicing up the power. Is this not done to the klr? I just took
off a
> Supertrapp race pipe with 20 discs and replaced with a quiet ids2
with
> 8. I'm a little disappointed that when I crank the throttle, front
> wheel rises about an inch off the ground. Not much response.
Otherwise
> the bike feels very smooth, I feel like I am floating. Saddle, pegs
> and bars are very comfortable, like lounging on a sofa.
juice it!
Posted: Fri Jul 20, 2001 5:00 pm
by Ted Palmer
svnorcal@... wrote:
>
> I am a new KLR650 owner. Just picked up an a8 with 3500 miles. I've
> been scanning many of the posts and do not see anything regarding
> juicing up the power. Is this not done to the klr?
[...]
Most people stick to customary bolt-on mods like jets and muffler.
The KLR motor is a somewhat old design, dating back to 1984.
There isn't much around in the way of internal upgrade parts
because assume there isn't much demand.
If there isn't much demand then it tells you something about
what most owners think about the bike.
> Otherwise
> the bike feels very smooth, I feel like I am floating. Saddle, pegs
> and bars are very comfortable, like lounging on a sofa.
It can't be a stock seat in that case, else you haven't ridden it for
hours on end.
Mister_T
juice it!
Posted: Fri Jul 20, 2001 5:56 pm
by richardm@gowinnt.com
Quoting svnorcal@...:
>I am a new KLR650 owner. Just picked up an a8 with 3500 miles. I've
>been scanning many of the posts and do not see anything regarding
>juicing up the power. Is this not done to the klr?
A stock KLR has about 36hp at the rear wheel. A jetted, piped, and airbox-
modded KLR will make about 42hp. You have to decide if the money/time spent on
the mods plus the lower MPG and the loud racket is worth the 6 extra hp. It
takes more than 42hp to make a bike "fast," IMHO.
juice it!
Posted: Fri Jul 20, 2001 7:06 pm
by Stuart Mumford
I'd like to see one make 42 hp.
I have yet to see a dyno of anything above 38hp.
This must be the elusive 42 hp KLR at Chaparral that you can't see or buy or
order?
BTW I went in to Chap one day and asked the salesman "What is this black
thing back here on the rear fender?" (while pointing at the charcoal
canister) and was informed "That's the engine control computer." Maybe that
was the 42hp Tokyo Dynamo model.
Congratulations!
CA Stu
-----Original Message-----
From Black Diamond RM
>A jetted, piped, and airbox-
>modded KLR will make about 42hp.
~~~~sniploich~~~~~~~
juice it!
Posted: Fri Jul 20, 2001 9:21 pm
by Dan Oaks
Here, here!
--
bierdo
richardm@... wrote:
> Quoting svnorcal@...:
>
> >I am a new KLR650 owner. Just picked up an a8 with 3500 miles. I've
> >been scanning many of the posts and do not see anything regarding
> >juicing up the power. Is this not done to the klr?
>
> A stock KLR has about 36hp at the rear wheel. A jetted, piped, and airbox-
> modded KLR will make about 42hp. You have to decide if the money/time spent on
> the mods plus the lower MPG and the loud racket is worth the 6 extra hp. It
> takes more than 42hp to make a bike "fast," IMHO.
--
Dan (BIERDO) Oaks, President
Formtech Services, Inc.
the stable:
'01 XT225 - '01 KLR650 - '99 DR650
'82 XL250R - '78 TC90 - '77 GS550
'91 Yammy 4 stroke golf cart
2 bad dogs and a sled
Wanted:
TLR200
Mfr. of Printing Equipment & Supplies
formtech@...
bierdo@...
http://www.formtechservices.com
Mfr. of 4x4 POLY Motorcycle Parts
bierdo@...
http://www.dirtly.com
2970 Robins Nest Ct.
Saint Cloud, FL 34772-8182 USA
800 522-6257
407 957-7887 (fax)
juice it!
Posted: Fri Jul 20, 2001 10:19 pm
by John Irvine
It
> > takes more than 42hp to make a bike "fast," IMHO.
>
> --
> Dan (BIERDO) Oaks, President
>
This talk of HP and it reminded my that my "other"
bike has just about 100 hp more than the klr. The XX
dyno's around 137 RWHP. So worrying about a couple
more on the klr amuses me, but I still do it. The KLR
will never be fast, fun yes, fast?? But then the XX
isn't very fast on a rocky logging road.
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
juice it!
Posted: Fri Jul 20, 2001 11:02 pm
by Susan Moorhead
Ted,
Either that or this guy truly belongs with the "iron butt" crowd. (grinning)
Marshall in Afton, Ok
'95 KLXC3 (still working on a more comfortable seat)
----- Original Message -----
From: Ted Palmer
To: DSN_klr650@yahoogroups.com>
Sent: Friday, July 20, 2001 9:33 AM
Subject: Re: [DSN_klr650] Juice it!
> svnorcal@... wrote:
> >
> > I am a new KLR650 owner. Just picked up an a8 with 3500 miles. I've
> > been scanning many of the posts and do not see anything regarding
> > juicing up the power. Is this not done to the klr?
> [...]
>
> Most people stick to customary bolt-on mods like jets and muffler.
> The KLR motor is a somewhat old design, dating back to 1984.
> There isn't much around in the way of internal upgrade parts
> because assume there isn't much demand.
> If there isn't much demand then it tells you something about
> what most owners think about the bike.
>
> > Otherwise
> > the bike feels very smooth, I feel like I am floating. Saddle, pegs
> > and bars are very comfortable, like lounging on a sofa.
>
> It can't be a stock seat in that case, else you haven't ridden it for
> hours on end.
>
> Mister_T
>