this weekend

[marcclarke@unforgettable.com]

--- In DSN_klr650@egroups.com, "Dennis Eastman" wrote:

> > I am 5' 6" and I had them lowwer the back end as low as they > dared and I am able to reach the ground with the balls of my feet. > I have been told that a custom Corbin seat would lower me another > inch and a half which would be better but still wouldn't be flat > footed. If there is lowering kit that I can put on this bike I > would appreciate any information on where to get it.

Try DualStar at: http://www.dual-star.com/lowering_links.htm -- Marc, A12

[Andre Roy]

Hi I just want to share this weekend memory with you. First, my shift lever was broken since last week and I got it solder saturday morning. Kawasaki canada really suck with replacement part availability. I also took the opportunity to paint my muffler with "tremclad high temperature paint" and I'm still suprise how quick and clean is the result. By dismounting the muffler I also solved an mid summer problem. The speed wasn't consistent at 4000rpm and it was cause by a faulty cylinder head/muffler pipe gasket problem. I installed a heat grip system this sunday. The heater consist of 2 "plastic" layer films insert under the grip. I just want to tell you that this system really worth the installation time. It is now a pleasure to ride in colder temp. Good week! Andre Roy Klr a13, Mtl