Page 1 of 1
nklr wooden bead seat cover
Posted: Fri Oct 06, 2000 2:12 pm
by Lew Waterman
List: Anybody had the experience of using a wooden bead seat cover? I
see it in the Whitehorse Press catalog. Seems to me, from the looks
of it, that it might increase the long distance comfort level, allow
ventilation under my sizable rear end and keep my rear end separated
from a soaking wet seat in the rain. I don't know if the wooden beads
are waterproof, if not I would make them so. I want to use this item
on top of a Russel day-long seat for my tour, unless the group gives
me reason not to. Feedback please.
Lew Waterman
Punky & Lew's Americas Motopaseo
nklr wooden bead seat cover
Posted: Fri Oct 06, 2000 2:15 pm
by Lew Waterman
List: Has anybody tried one of the wooden bead seat covers? Seems to
me it would increase the comfort level on long rides, allow
ventilation under my sizeable butt and keep it separated from a
soaking wet seat in the rain. I am considering using the bead cover
on top of a Russel Day-Long seat for my tour. Feedback please.
Lew Waterman
Punky & Lew's Americas Motopaseo
Greenacres, Florida
nklr wooden bead seat cover
Posted: Fri Oct 06, 2000 2:22 pm
by punkynsquirt@cs.com
List: Sorry for the double posting. I thought the first one failed to go.
Lew Waterman
Punky & Lew's Americas Motopaseo
Greenacres, Florida
nklr wooden bead seat cover
Posted: Sat Oct 07, 2000 12:20 am
by steve secrest
www.sporttour.com Click on KLR goodies. This is the one I recently started
using ... best 15 dollar improvement my ass has had in a while!
> List: Anybody had the experience of using a wooden bead seat cover? I
> see it in the Whitehorse Press catalog. Seems to me, from the looks
installing a 16 tooth front sprocket
Posted: Sat Oct 07, 2000 4:57 am
by scot davenport
Very good point. Thanks for pointing that out.
>From: BCSavWill@...
>To: scot_davenport@...
>CC:
DSN_KLR650@egroups.com
>Subject: Re: [DSN_klr650] Re: Installing a 16 tooth front sprocket
>Date: Sat, 7 Oct 2000 00:43:26 EDT
>MIME-Version: 1.0
>Received: from [152.163.225.67] by hotmail.com (3.2) with ESMTP id
>MHotMailBBA7F4FA0035D82197B298A3E143C0498; Fri Oct 06 21:43:45 2000
>Received: from BCSavWill@... imo-r13.mx.aol.com (mail_out_v28.26.) id
>i.93.1804bba (3844);Sat, 7 Oct 2000 00:43:33 -0400 (EDT)
>From BCSavWill@... Fri Oct 06 21:43:57 2000
>Message-ID:
>X-Mailer: CompuServe 2000 32-bit sub 108
>
>Hi,
>
>Ref the lcking tab washer, dont use the same bend twice. If you must reuse
>it
>bend a part that has not been bent before. Easily done by putting it back
>in
>the required place. There is no master spline.
>
>Othewise it will break on you sometime.
>
>Regards,
>
>Brian
>A14
>D17
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
Share information about yourself, create your own public profile at
http://profiles.msn.com