center and side stands
Posted: Mon Oct 02, 2000 11:41 am
I had a piece of 3" wide alu that was cut about 1.5 inches longer than
my centerstand track for my '95 BMW R11GSA and it worked really well in
soft stuff. Also had a 4 x 4" plate with a string tied to it for the
side stand. I later welded on a 3/8" plate to the Beemer to pick it up
a bit and for a larger footprint. Had to make sure it didn't bump into
anything when in the store posistion and offset so I would be dragging
it around corners.
Andy
Jennings, La.