Page 1 of 1
cleaning stock or foam filters
Posted: Thu Sep 07, 2000 9:17 am
by aches@deltech.net
Best way is the old tried and true of hot soapy water, wring dry in a
bath towel, Re-oil ( I use just plain old motor oil seems like forever
ha ha ha ) , wring it out with another Towel, reinstall.
--
Best Regards & Happy Trails
Andy Chesley @ 57 and ticking
Y2KLR650 @ 6.4K sMiles
97 R11RA (Amiga) @ 16K Miles
So Many Roads, So Little Time
http://members.deltech.net/aches/
vibration & heated grips?
Posted: Thu Sep 07, 2000 6:51 pm
by Dan Paulsen
> One thing I plan to do for sure is
> add some heated grips, any one know if I can run those and a vest
without killing the battery? >>
> Not tried heated grips/vests. You can check the archives for info
on them > if one of the listers from the Great White North doesn't
pipe up with their > experiences.

All best
> Scott
Sure! With the Gerbing jacket, gloves and socks that I use on
another
bike too along witht the basic on/off rocker switch I can ride in
warmth on the KLR. Surprisingly the bike handles this load OK on the
short trips I have done with no adverse effects on ability of the
battery to start/turn the bike over after a stop. Not sure if a long
trip would be different. I do switch the electric warmth off at low
rpm situations and usually have to cycle it anyway as it is too warm
to have it on all the time.
Dan Paulsen
Graham WA