balancer mechanism, clutch basket upgrades
Posted: Thu Sep 07, 2000 12:43 pm
Bill, please be careful when replying, you just reposted the entire digest
to the list...you have to use cut and paste.
The procedures for the upgrade are described in the classic KLR issue
December '99 by Elden Carl. Here are excerpts of Elden's instructions:
Balancer mechanism update
The part nos are:
92144-1860 Idler Spring
670B1507 7mm O-Ring
92200-1263 Washer
92150-1923 Bolt, idler adjuster
92026-1462 Spacer, Idler
39133-1060 Sprocket, Idler
92046-1234 Needle Bearing
39115-1077 Shaft, Idler
The last four parts cannot be installed without machining .075" material
from the idler shaft hole in the left inner case.
The clutch basket upgrade is:
92143-1769 Collar
18095-1311 Clutch Basket
92022-1868 Washer
92015-1555 Nut
Approximately .210" material must be removed from the top of the clutch
basket (measure yours).
Kurt Simpson
Editor
Dual Sport News
476 E South Temple #467
Salt Lake City, UT 84111-1313
www.geocities.com/~klrdsn/page2.html>