Page 1 of 1
[dsn_klr650] speaking of exhausts or, the tweet
Posted: Sat Aug 19, 2000 12:40 am
by Tumu Rock
On Fri, 18 Aug 2000 17:34:12 -0400, Patrick Sprague wrote:
Heck, mine's been tweetin' since 4500 miles. Visions of Big Guns,
supertrapps, etc. runnin' around back in the gray matter.
____________________________________________________________________
Got mine to sing at about 2000 miles. Must be lucky.
dat brooklyn bum
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
klr cam timing specs
Posted: Sat Aug 19, 2000 9:42 am
by Ted Palmer
KLR KLX
600A 600B 650A 650C 650A 650C
Inlet Open 19 19 19 19 19 17
Close 69 69 69 69 65 63
Duration 268 268 268 268 264 260
Exhaust Open 55 55 57 57 53 53
Close 25 25 31 31 27 27
Duration 260 260 268 268 260 260
As published in factory workshop manuals available in Australia
which do not list method of timing measurement, or valve lift.
Overall cam lobe height specs are listed but not the cam base
circle radius, so can't be used to calculate the lift.
Mister_T