klr cam timing specs

[Tumu Rock]

On Fri, 18 Aug 2000 17:34:12 -0400, Patrick Sprague wrote: Heck, mine's been tweetin' since 4500 miles. Visions of Big Guns, supertrapps, etc. runnin' around back in the gray matter. ____________________________________________________________________ Got mine to sing at about 2000 miles. Must be lucky. dat brooklyn bum _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html

[Ted Palmer]

KLR KLX 600A 600B 650A 650C 650A 650C Inlet Open 19 19 19 19 19 17 Close 69 69 69 69 65 63 Duration 268 268 268 268 264 260 Exhaust Open 55 55 57 57 53 53 Close 25 25 31 31 27 27 Duration 260 260 268 268 260 260 As published in factory workshop manuals available in Australia which do not list method of timing measurement, or valve lift. Overall cam lobe height specs are listed but not the cam base circle radius, so can't be used to calculate the lift. Mister_T