[dsn_klr650] weather proofing nklr
Posted: Mon Aug 14, 2000 1:51 pm
Howdy Dan - I had to keep a bike out side for three years, had only minimal rust due to some minor points: Let the bike dry out after a rain or heavy dew, don't allow it to sit under a cover that holds in the moisture, put stand-offs between the bike and the cover to avoid paint discoloring and wet spotting, but be careful of marking your bike with the stand-offs. I always used cotton covers to keep the leaves and birds off, but let the moisture evap. off. Use liberal amounts of real wax or other water repellant stuff on metal parts that have been nicked or scratched, rust will always attack the weak points first, like bolt heads, drive chains etc. Places that expose the iron due to wear or scratches, etc. To clean up areas that show rust (and prep them for oiling) use Navel Jelly (not the stuff from your belly button!) ;^) --- Rev. Chuck :^)>+ A13 http://klr650.50megs.com ~~~~~~~~~~~~~~~~~~~~~~~~ Send your favorite photo with any online greeting! http://www.whowhere.lycos.com/redirects/americangreetings.rdct>whats the best way to keep a bike from rusting up when >you have to keep it outside, in addition to a cover? >also, whats the best way to treat parts that are >starting to show bits of rust and corrosion?