fork to triple clamp bolt torque spec.
Posted: Mon Aug 14, 2000 3:07 pm
When I dumped my A15 the wheel was out of alignment from the handle bars. I
though I bent the front shocks. I loosened the 4 bolts that clamp the lower
triple clamp to the forks and the wheel snaped back straight. I hope I
didn't bend them. I dumped the bike at around 5 mph. I don't have a service
manual but would like to torque the bolts back to spec. I don't know if they
are left a little lose to alow them to shift incase of a fall to prevent
major damage.
Thanks.
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com