Page 1 of 1
bashing the moose cont
Posted: Sun Aug 06, 2000 1:20 pm
by Mike Awesome
My apologies for posting my original twice.
I removed the drain plug by drilling a hole through the head of the
plug , applying a little pressure and the plug jumped back on the
threads. Only to find:
1. missing metal washer on plug ( thanks St Pete Kawasaki)
2. The small circular area , where drain plug washer would seat, is
now half circle as part has cracked and broken off.
I placed all the blame on Moose wrongly. The dealership most
definitely never replaced the washer and probably (99% sure) over
torqued the drain plug ( with washer missing). Maybe causing all my
woes. I will insert a new drain plug ( with washer) wrapped with
teflon
tape hoping for no leaks.
Again sorry for the earlier repost.
bashing the moose cont
Posted: Sun Aug 06, 2000 3:54 pm
by Mike Awesome
> . Only to find:
> 1. missing metal washer on plug ( thanks St Pete Kawasaki)
> 2. The small circular area , where drain plug washer would seat, is
> now half circle as part has cracked and broken off.
and last and worst
3. hairline cracks in case along hole for drain plug (woe is me)
>
> I placed all the blame on Moose wrongly. The dealership most
> definitely never replaced the washer and probably (99% sure) over
> torqued the drain plug ( with washer missing). Maybe causing all my
> woes.
remember this all stems from my ill-fated trip to the dealership to
have the valves checked by qualified??? mechanics. Less and less
likely the bash plate was the weak link here.
Mike KLRless for now Awesome
A1klr650 down but not forgotten
p.s. anyone know a good lawyer.. good laywer yea like a qualified
mechanic what an oxymoron
bashing the moose cont
Posted: Sun Aug 06, 2000 9:51 pm
by Karl Raupp
>My apologies for posting my original twice.
>I removed the drain plug by drilling a hole through the head of the
>plug , applying a little pressure and the plug jumped back on the
>threads.
I find a good way to get the threads to 'jump back' are to take a flathead
screwdriver and jam it between the bolt head and the other surface and then
trying to undo the bolt. Sometimes you need to twist the screwdriver as if
you are trying to pry it apart. Usually works for me.
>The dealership most
>definitely never replaced the washer and probably (99% sure) over
>torqued the drain plug ( with washer missing).
Wow. Remind us again never to visit that dealership. Good luck with your
case!
TTYL
Karl
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
light bulbs and sprokets?
Posted: Sun Aug 06, 2000 9:56 pm
by kcorriga@together.net
Hi folks. I have questions on a couple of topics that I'm sure some
of you have already investigated.
1) I recently have had a couple of near misses with some of the
nearsighted motorists of the 4 wheeled variety. I have decided that
when using the 'Big Green F#%*er' to get to and from work I must be
more visible if I stand a chance of distracting them from their cell
phones and palm pilots for just an instant while I am in there path.
I have seen H4 headlamp bulbs offered much stronger than the OEM 60/
55w. Other options are 100/55w, 100/80w, and 130/90w. These are
also offered in "All Weather', Diamond Blue', 'White', 'Xenon', 'HIB
Blue', 'Yellow', and 'Gold with an additional ion gas tube around the
filament bulb'. What is the highest power bulb I can safely use and
what color is the most visible in the day time but still good at
night? I saw a rice rocket coming at me the other day with the most
amazing yellow or gold headlamp I've ever seen. Does any one know
what these are?
2) I have also found that the OEM gearing is to high to be
comfortable on the log skidder roads, cow paths and snowmobile trails
that I ride on. This is definitely not an observed trials mount. I
seem to have mucho excess road range a would give up anything over 60
mph at a reasonable rpm to have 3 gears to work with in the crud
instead of just 1. I have heard many of you talk about simply going
down to a 14 tooth on the front. Did that work well for you or
should
I also change the rear spocket up to ??? teeth to do it right and
take
up excess chain slack?
Thanks in advance for the help.
K.C.
Y2KLR650 'Big Green F#%*er'
73 Yami RT3 360 'Little Thumper'