[dsn_klr650] c series forks for the a series
Posted: Sun Aug 06, 2000 10:53 am
At 1:52 PM -0700 8/4/00, Rich Kickbush wrote:
I found that I didn't need them.> Now, I'm thinking that I could have fork >caps made up similar to Eldon Carls, to extend the effective length of >the fork and increase rake.
I have an entire front end from a Tengai on my A2. The Tengai uppers are 38mm (but have 1mm thicker walls than the standard KLR) so I didn't need to change the triple clamps. The parts swap was easy. Mark B2 A2>Those of you with Tengai front ends, did you have any problems grafting >the front end on? Or have you just fitted lowers? I'm looking at >replacing everything, including the triple clamp.