At 1:52 PM -0700 8/4/00, Rich Kickbush wrote:
> Now, I'm thinking that I could have fork
>caps made up similar to Eldon Carls, to extend the effective length of
>the fork and increase rake.
I found that I didn't need them.
>Those of you with Tengai front ends, did you have any problems grafting
>the front end on? Or have you just fitted lowers? I'm looking at
>replacing everything, including the triple clamp.
I have an entire front end from a Tengai on my A2. The Tengai uppers
are 38mm (but have 1mm thicker walls than the standard KLR) so I
didn't need to change the triple clamps. The parts swap was easy.
Mark
B2
A2