Page 1 of 1

[dsn_klr650] euro light pod/cruise control

Posted: Sun Jul 23, 2000 9:35 pm
by John Lyon
Neil: Fred at Arrowhead Motorsports has Headlight Shutoff Switch you may want to check out. http://www.angelfire.com/ut/moab/newproduct.html I am using the Universal Vista Cruise Throttle Lock and like it. There is a very good article on throttle locks at the DSN web site under Archives of "Tech Tips" and "Accessories of the Month". http://www.dualsport.org John
On Sun, 23 Jul 2000 20:15:14 EDT, carmic7@... wrote: Hello list, Friends of mine have purchased the european light switch pod for their BMERS so they can idle without headlights, I would like this for the KLR so I don't have to start the bike with the headlight on, anyone ever seen one? or have any ideas? also. what criuse control works on the KLR? The vista cruise is too thick to get between the cable housing and grip flange. -neil _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html

[dsn_klr650] nklr: how do i "reply"?

Posted: Wed Jul 26, 2000 3:26 pm
by Arne
----- Original Message ----- From: "Brad Davis" To: DSN_klr650@egroups.com> Sent: Sunday, July 23, 2000 7:36 AM Subject: [DSN_klr650] NKLR: How do I "Reply"? > Has anyone figured out how to reply to both the group and the > originator when using the eGroups "Reply" screen? It looks to me the > you can choose only one of the addresses to reply to. > > Thanks, > Brad Davis ________________________ This is the way ot works when you interact with the list from the DSN_KLR650 web site. You choose between the original poster and the list. If you are interacting with the list via your regular Email subscription, you have the features of your particular Email program at your disposal. Arne

[dsn_klr650] euro light pod/cruise control

Posted: Wed Jul 26, 2000 3:31 pm
by Arne
Subject: [DSN_klr650] euro light pod/cruise control Hello list, also. what criuse control works on the KLR? The vista cruise is too thick to get between the cable housing and grip flange. -neil ___________ Move the cable housing in a tad. Arne