Page 1 of 1
[dsn_klr650] nklr: night vision goggles
Posted: Sun Jul 23, 2000 7:22 pm
by KLR650@webtv.net
Brian,
Night Vision devices of the type you are looking at only work in total
darkness. If somebody turned on a light source in the area where you're
viewing, it would be magnified 100,000 times and your would be
momentarily blinded by the brightness. They also have a very limited
field of view.
Conall
A4 KLR650 Skyhawk
[dsn_klr650] nklr: night vision goggles
Posted: Mon Jul 24, 2000 5:23 am
by CrazyDave
On Sun, 23 Jul 2000 17:22:17 -0700 (PDT), KLR650@... wrote:
> Brian,
>
> Night Vision devices of the type you are looking at only work in total
> darkness. If somebody turned on a light source in the area where you're
> viewing, it would be magnified 100,000 times and your would be
> momentarily blinded by the brightness. They also have a very limited
> field of view.
>
> Conall
> A4 KLR650 Skyhawk
>
I believe there are also issues with depth of field perception.
crazydave
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
[dsn_klr650] broke down on side of road
Posted: Mon Jul 24, 2000 11:42 am
by Kurt Simpson
> The best thing to do when buying a used bike is to have a
> full tune-up done, unless the previous owner 'proves' that
> a recent tune-up was done. At 7600 miles, you're due for a
> valve adjustment.
I agree Jim. Of course, I think the very best thing is to do it yourself. I
don't recall every buying a new or used bike that in the process of
cleaning, detailing, tightening I haven't found something amiss. Yesterday,
I was going through my son's XT225 with less than 2,000 miles. I was nearly
through and said to myself, "this may be the first time I don't find
anthing." Just then I brushed against the plastic brake disc protector and
noticed it had slipped away from under a mounting clamp. I looked a little
closer and found the speedometer cable misrouted and the tire rubbing
against it in such a way that it was already worn through the rubber and
starting to rub on the metal.
For an older used bike I think "tune-up" ought to include a carb removal,
teardown and cleaning. They always seem to have varnish and crud in them.
Kurt