honda nx650 (nklr)

[wileyE_@excite.com]

Anyone know the spec for the 3 bolts that hold the thermostat cover on? Have to replace the 'stat as the rubber gasket is developing a leak. Thinkin about just putting some sealant on the cover flange till the part comes in, what-ya all think?

[wileyE_@excite.com]

Thanks for the quick reply John, but I did a quicker reassembly. Set em at 69inlbs (a generic spec for a 6mm on an old chart I have). Lucky nothing snapped or stripped, guess I could run out and reset it before the locktight sets up. cheers wE -- In DSN_klr650@egroups.com, John Lyon wrote:

> 56 inch pounds for the thermostat cap bolts > > John > > On Wed, 19 Jul 2000 02:15:00 -0000, wileyE_@e... wrote: > > Anyone know the spec for the 3 bolts that hold the thermostat

cover

> on? Have to replace the 'stat as the rubber gasket is developing

a

> leak. Thinkin about just putting some sealant on the cover flange > till the part comes in, what-ya all think? > > > > > > _______________________________________________________ > Say Bye to Slow Internet! > http://www.home.com/xinbox/signup.html

[Jim Hyman]

Kevin, A quick check of major search engines (Northern Light, Excite, Alta Vista) yielded 800-900 hits. Many of the sites were in Australia and England & included several NX650 groups. You may need some translation software (G!). Happy searching. Professor A9 Federal Way, Wa [USA] -------------------------- --- "Kevin" wrote:

> Anyone have an info or links to info on the NX650? > Maybe reliability or bike specs?