Wilsons Sandbox

I have Acerbis Rally Brush hand guards on my Tengai. They went on easily, but yes, clearance it tight. I have them positioned so that they only touch the fairing when they reach the steering stops. Watch out for the screws on the inner clamps. I had to trim one down with my Dremel Tool after the screw made a 1" long scratch in the fairing. Mark B2 A2 At 10:27 PM +0000 7/13/2000, jeff.s.anderson@... wrote:

>Help! >Does anybody have experience in installing hand guards on >"Tengai"? I am referring too the end of bar type(Acerbis or Moose) >not OEM type. I am concerned with the clearance between the >frame mounted fairing and the handle bar.(Only1/2" @ 9" from end of >bar).