[dsn_klr650] ims klr tank

DSN_KLR650
Post Reply
Mark
Posts: 653
Joined: Tue Dec 21, 2010 8:03 pm

nw pa and quaker steak & lube nklr

Post by Mark » Tue Jul 11, 2000 8:52 am

Joe, where in NW PA? I'm passing through Bradford on the eve of the 21st on my way to Buffalo. Michael, where's the Quaker Steak & Lube? Mark (in Central PA) B2 A2 At 8:30 AM -0400 7/11/2000, Scherer, Michael wrote:
>Joe, NW PA? Have you ever gone to Quaker Steak and Lube on a Wednesday >night? Haven't made it this year but they sure draw a lot of bikes. > >-----Original Message----- >From: Joe [mailto:jalberth@...] >Sent: Monday, July 10, 2000 10:18 PM >To: DSN_klr650@egroups.com; mengebretson@...; Robert Sakmar >Subject: Re: [DSN_klr650] Re: Sold BMW -- bought A15 > > > >----- Original Message ----- >From: Robert Sakmar >To: DSN_klr650@egroups.com>; >Sent: Sunday, July 09, 2000 8:08 PM >Subject: [DSN_klr650] Re: Sold BMW -- bought A15 > > > > -- Mark: > > Last fall I sold my 97 R1100RT and purchased my A13. You are not crazy, > > you just came back to your senses. > > Enjoy it, I do. > > -- > > > > Robert Sakmar > > Technology Engineer > > Sun Microsystems > > Phone: 913-317-3815 > > Email: robert.sakmar@... > > > >OK, while we're on the "coffession bandwagon" here's another. Sold my 84 >R100RT this spring and bought a KLR. The BMW has its place but for the kind >of riding available around here the KLR rules for most fun bike and most >bike for the money. >Joe Alberth >NW Penna. >A13

Mark
Posts: 653
Joined: Tue Dec 21, 2010 8:03 pm

[dsn_klr650] ims klr tank

Post by Mark » Tue Jul 11, 2000 8:59 am

Got any pix you can send us?? Thanks, Mark B2 A2 At 3:39 AM -0400 7/11/2000, JSherlockHolmes@... wrote:
>Hi Folks, > >Received my IMS KLR650 tank from IMS a few days ago. Initial impression was >both good and disappointing. The tank looks excellent. Really adds some >visual character to the KLR, ... the bad points that I >located... there is too large of a gap between the fuel tank and >the right tank shroud along the back vertical edge of the shroud... >the left shroud overlaps the top of the tank ... end result is that >the top corner of the shroud overlies the tank by approximately 1.5" >to 2.0".

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests