[dsn_klr650] rear wheel noise, new sprocket
Posted: Mon Jun 12, 2000 11:40 am
snip My question is that the rear wheel seems>From: "Jim Jackson" >To: DSN_klr650@egroups.com >Subject: [DSN_klr650] Rear wheel noise, new sprocket >Date: Mon, 12 Jun 2000 05:49:01 PDT > >Hello All! > >First, I must apologize for not researching this in the archives first. My >ISP at home is down and I can't get to e-groups at work. > >I just set up the extra rims on saturday with a Kenda 270 up front and a >Cheng Shin in back. Used the old 43T rear sprocket and all other hardware >is >new including bearings. Also used a new 14T front sprocket. I adjusted the >chain .
Yes, Id check the chain tension and adjust it a little tighter if required. Improperly adjusted chains and worn parts cause noise. Also check that the new back tire has clearance all around. Conall ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com>very noisy below 5 mph and coasting. Seems to go away with mild braking or >power. Above 5 mph there is no noise. > >Sounds like I need to tighten the chain a bit? Any suggestions? > >Thanks, > >Jim Jackson II >A13 - South Carolina > > > >________________________________________________________________________