Wilsons Sandbox

Hi eroads, Thanks for responding so quickly. I don't have a torque wrench yet, so I was asking torque spec to get an idea of frame tube strength for educated guess-torqueing. Will the tube dent or crack? (so that I know when to stop tightening) 8^O Thanks Again, Eric A13L PS-for a name, I'm thinking "Moma's Nightmare" or "Beef" or "Girlfriend" or [it moves out faster than an] "Angry Girl" PPS-maybe winner of the Moab tire change contest could name it something? Eric posts:

> Can anyone give me an approximation of the torque I should apply to

mount

> the U-bolt to the frame tube of the KLR when installing the Moose bash

plate?

> Should I also use the blue Loctite on the supplied locknuts? > Thank you for your help, > Eric > A13L >

eroads responds: ======== I'm sure there's a torque and maybe someone will give you an idea but it's likely to be at the very low end of most torque wrenches. I'd suggest you just get it good and snug with a regular open-end (box end) wrench and definitely use the locktite.