Page 1 of 1
[dsn_klr650] valve specs
Posted: Fri May 26, 2000 9:09 pm
by Verle Nelson
> I measured in inches but the book has the specs in mm. Does
> anyone have on hand the specs in inches? My measurements were:
>
> LI: .006
> RI: .005
> LE: .007
> RE: .006
>
Many of us use a freeware (now $1 if you register it) program called
ShimCalc to do the arithmetic once we have measured and checked
the current shim sizes. You can download it at:
http://www.ironjungle.com/
Verle Nelson
Cedaredge, CO
[dsn_klr650] valve specs
Posted: Fri May 26, 2000 11:46 pm
by Kurt Simpson
> Im glad you all are on the subject of valves. I checked mine tonight and
> went home(dont keep bike at home)with my measurements written on paper. I
> measured in inches but the book has the specs in mm. Does anyone have on
> hand the specs in inches? My measurements were:
>
> LI: .006
> RI: .005
> LE: .007
> RE: .006
You don't mention how many miles on your bike. I like checking them at 500,
1500, 3000, 6000 -- keeping them at a loose .006-.008 intakes and .008-.010
exhaust. After that you can check them every 6-10,000 and tighten them to
.004-.006 intakes and .006-.008 exhaust. Each shim size is worth .002".
Kurt
[dsn_klr650] diaphragm, i mean battery, gel
Posted: Sat May 27, 2000 8:09 am
by CrazyDave
On Fri, 26 May 2000 11:44:07 -0600, Bogdan Swider wrote:
> Call me anal-electric, but at some point after the rally, I'm going to
> change out a battery that, as of now, is just fine. It's a 3+year old
sealed
> (Yuasa I think). I'll be in some out of the way places this Summer and
would
> just fell better about it. I was going to go to the same store as before
and
> get the same thing. Then, awhile ago on the list someone posted a address
> for gel batteries; I checked and they come in klr size. The first I heard
of
> these was a rave review from a Goldwing guy I met in Baja. He claimed
they
> could be left for months without charging. They weren't available for
cycles
> at that time; his wasn't a moto-unit but adapted from another source.
> Anybody know of any downsides to these things ? Bogdan
I saw the gel cells for motorcycles at the Wal-Mart near my house. Dont
know if they have the KLR size or not. I think the price was around $35.00.
crazydave
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit
http://freelane.excite.com/freeisp