[dsn_klr650] klr: handlebars and lowered front end.
Posted: Fri May 12, 2000 1:39 pm
At 09:22 AM 5/12/00, Raamses@... wrote:
Saw the bars off if you are sure you want narrower bars. The worst that could happen is you would have to buy new bars which is what you are considering now.>Does anyone know of any inexpensive aftermarket handlebars for the KLR that >are not as wide as the stockers (maybe 3 inches less)? If I can't find any >that I can afford, I think I'm gonna cut about an inch off of each side of my >stock bars.
Eldon Carls' fork extension caps raise the front end for the intended purpose of extending rake and increasing trail. You can easily lower the front end by loosening the triple clamps and sliding the fork tubes up (do support the front end while you work) but it will affect handling so be cautious when you go for a test ride. Be especially wary of soft sand and dirt. Verle Nelson Cedaredge, CO>Also, I am wondering if it would be possible to lower the front end of the >KLR at least an inch. I know this might sound silly to some of you, but I'm >just wanting to see what position fits me best. I know that getting Elden >Carl's fork caps/extensions are supposed to lower the front (somehow). Does >anyone know by how much? Any other suggestions?