Wilsons Sandbox

----- Original Message ----- [b]From:[/b] msfaul@... [b]To:[/b] calis@... ; DSN_klr650@egroups.com [b]Sent:[/b] Wednesday, May 10, 2000 11:32 PM [b]Subject:[/b] Re: [DSN_klr650] Fusebox mod   ----- Original Message ----- As you look at fuse box mods, you may also want to consider re-locating the fuses. I basically did what Arne showed in his article at http://www.geocities.com/~klrdsn/page122.html> but I put the mini-blade fuse holders on the vertical frame member on the left side of the bike, just aft of the sidestand switch cover. This way, if you have racks or hardbags (or anything) covering your access to the seat bolts, you can still get to the fuses easily. No need to remove luggage, racks or seat. Just need to use waterproof fuse holders. They're like $5 each, and I just zip-tied them to the frame. The caps have stayed on, and all's been worry-free and waterproof for about 10,000 miles, including dirt, highway, etc. Just a thought. Mike Magier 98 KLR650 GroundHog 99 ST1100ABS Sweetness ----------       That`s where I placed my aircraft circuit breakers ( in a black waterproof housing) so all I have to do is reach down and re-set, while driving. That`s been over a year ago and I`ve had no problems.   Skip