[dsn_klr650] klr650: valve questions
Posted: Tue May 09, 2000 12:07 pm
clint750@... wrote:
I guess taking out the spring stops the tensioner extending any further.> First, download the ShimCalc software off the DSN site. I thought > it was great. Took the brainwork out of it. Second, a thought about > Eldon Carl's valve adjustment procedure on the same website. He > specifies the removal of the cam chain tensioner cap and spring. I > don't see what this accomplishes since the plunger is a nonreturn, > ratcheting arrangement.
But not necessarily if the spring is removed.> In fact, if cam removal is required and slack > is introduced in the cam chain, the plunger will extend, resulting in > an overtight chain after the cams are resecured.
Which is what I would do on my bike if I had that kind of tensioner fitted. For some reason my 600 has the earlier screw type tensioner. Removing the tensioner still requires the spring to be removed before the unit is refitted. Mister_T> The safe procedure > would be to initially remove the entire tensioner housing and then > retract the plunger and reinstall the housing when the job is done.