ebc rotor install

[Andrew]

I see what you are saying. This was originally Cali. bike but all that was promptly removed as soon as I got it home to Idaho. I tried an experiment tonight and thought I would put a paper towel over that inlet, in the top rear left side of the air box. That inlet does not have a screen over it of any kind.The towel was enought to choke the air flow off to the carb that it wouldn't run. So, I took a 3/8 drill bit and punched a bunch of holes just along and parallel to the seam on the left and along the shoulder of the air filter access panel. When I covered those new holes up with my hand, I could FEEL the air sucking in. -Andy

[Rick]

Bolt off, bolt on, blue loctite and torque '--- In DSN_KLR650@yahoogroups.com, PAT CINDY PATTERSON wrote:

> > Do you have to bleed the front brakes or is it simply a bolt off

bolt on affair?ThanksPat

> > [Non-text portions of this message have been removed] >