On Mon, 2003-01-27 at 17:19, Devon Jarvis wrote:
> Yes, you need to disassemble them. You'll need to make a damper rod
> holding tool, this can done with a hacksaw, file, and $10 in materials
> from Home depot.
>
> I don't have the link for the tool handy. Zack?
No I don't but here's the recipe:
>>>>>>>>>>
My recipe for a damper rod tool (about $5, no welding involved)...
*Four 5/8" nuts (going on Pauls measurements, adjust accordingly if
we're wrong)
*3 ft piece of 5/8" threaded rod
1) Thread two nuts onto each end and jam nut them.
2) done.
>>>>>>>>>>
Z
DC
A5X
A11X