klr 650 valves cover bolts

[Fred Hink]

The Baja Rally has started and you can track the progress of #16 Tumu Rock here: http://www.bajarallymoto.com/ Fred http://www.arrowheadmotorsports.com

[Buddy Eckles]

The Baja Rally has started and you can track the progress of #16 Tumu Rock here: http://www.bajarallymoto.com/ Fred [img]https://a.gfx.ms/emoji_1F6B2.png[/img][img]https://a.gfx.ms/emoji_1F4A8.png[/img][img]https://a.gfx.ms/emoji_1F4A8.png[/img][img]https://a.gfx.ms/emoji_1F4A8.png[/img][img]https://a.gfx.ms/emoji_1F4A8.png[/img] http://www.arrowheadmotorsports.com

[John Biccum]

The two taller bolts go in the thinner portion of the  head cover. The two shorter bolts go into the thicker portion of the  head cover.  Counterintuitive but makes sense if you look at where the threads engage.From: DSN_KLR650@yahoogroups.com Sent: 9/ 27/ 2014 11:29 AM To: dsn_klr650@yahoogroups.com Subject: [DSN_KLR650] klr 650 valves cover bolts   Y'allDid a valves job and,of course, stripped the last bolt Helicoiled ,fixed properly , now i lost the position of the bolts . Which one goes where ?  

[The entire original message is not included.]