I don't remember if I posted before so here is a simple cheap trick.
If you look under the speedo, where the Throttle cables go threw a holding bracket. (thin wire)
I tuck away a 4in. Crescent, A VERY CHEAP little tool at Harbor freight, Home depot is where I got mine in the CHEAPY tools.
Gives me the little extra torque needed to open the cap, and also the Wing nuts I have on the Front Tool Boxs (2 PVC tubes. tire irons etc., & extra fuel filter)
Only person that has ever noticed it or said they seen it was 1 of our guys in Moab.
Also on the other side, inside the fairing, 2, .25 cent plastic cable holders Holding my Pressure gage.