damper rod tool - 2008 klr

[VanHornWhitewater]

Yup... I just use an impact gun and hold the fork in upside-down my hands, letting Mr. Gravity pull down on the fork upper. I've never had one that didn't come apart after 2 or 3 zaps.. Mark At 6:59 AM -0600 6/19/13, Fred Hink wrote:

>...Zapping it once or twice with an air impact >gun with pressure you put on the damper rod from >pulling the forks apart will keep it from >spinning and break loose this bolt. Not sure >this would work if you are turning this bolt >with a ratchet but it may. It ll take a few > impacts to break loose the bolt.