I, myself, have lusted over the new Yammy 1000 Fazer. But I rode my
brother-in-law's VFR 800 this summer and I dunno...it looks like I'm
gonna have to find some room in the garage early next spring. I
think maybe my KLR needs some company.
I really have to stop reading Cycle World and Motorcyclist.
Cheers,
D.
GBG eh14 (all alone, for now).
digest number 596
-
- Posts: 965
- Joined: Wed Apr 05, 2000 1:35 pm
nklr shopping spree and bandit 1200s
Having owned a Bandit 600, I can say that the 1200 would be an
awesome motorcycle, but it suffers from the same cold-bloodedness
that my 600 did. Many 1200 riders have jumped through the numerous
hoops to get there Bandits rideable in the winter months, but they
still suffer from stalling and bucking from the cold.
In comparison, there is the Kawasaki ZRX1100. Doesn't have the wind
protection that the Bandit has, doesn't have a centerstand, but oh is
it comfortable and fast. The KTRIC makes it run like fuel injection
without so much as a surge. Zero Gravity makes a nifty sport touring
shield for it. Monster brakes, 15 liters of storage under the seat
(what a concept!) 5.2 gallon fuel tank, emergency fashers and
wonderful ergonomics. All for the same price as a Bandit 1200.
Gino
--- In DSN_klr650@egroups.com, "Backroad Bill"
wrote:
locations.> I have been giving in to some very base temptations lately and have > purchased new helmet, boots, tank bag, and other stuff......now I > have new bike disease and am looking at the 2000 1200 Bandit for a > work bike. I can get one for $6299 in a couple of local
> Any Bandit riders out there care to offer up their two cents worth? > > ps.........could be worse, I could be "normal" and be spending my > money on Dockers, entertainment centers, and Ford Excursions. I am > sure you'll all understand.
-
- Posts: 93
- Joined: Wed Apr 19, 2000 7:58 pm
nklr shopping spree and bandit 1200s
In a message dated 10/11/00 10:52:01 PM Central Daylight Time,
k650dsn@... writes:
>>
Easy enough to fix the cold-bloodedness and leanness. Drill out the plugs
covering the idle mixture screws and back them out an additional 1 or 1.5
turns. While the carbs are off, shim the jet needles with small washers
(0-40, if I remember correctly). I did this to a friend's bike. WOW, what a
difference! Quicker warm up, and MUCH better driveability in all weather
conditions. No change in fuel economy. Try it, you'll like it!
Tom