[dsn_klr650] flywheel puller

[Krgrife@aol.com]

In a message dated 8/30/00 6:06:47 PM Pacific Daylight Time, pert0012@... writes: << I live in St. Paul MN, which is about an hour (1way) from Dennis Kirk. I drove up there and bought a Motion Pro puller that indicates is fits the KLR 650 (20mm x 1.5) which it does not. How can Motion Pro and/or Dennis Kirk have this misinformation?? I could order the Kawi puller, but it'll take 2-3wks. Again, I live in Minnesota and the riding season is gonna be ending soon. I've spent >> Try talking to the service mgr at your local dealership and ask if you can use one of theirs, offer to leave a deposit large enough to make them comfortable that you will return it. If they let you do this take the service mgr a six pack when you return the puller. Get a rep as a good guy with your shop's service guys and life can be much easier. BTW, it takes a lot of force to pull that rotor, the bolt is on there with 130 ft/lbs of torque. The service manual says to use a new bolt when you reinstall the rotor. Regards Kurt Grife