[dsn_klr650] help needed with fan motor/ coolant level

[John Lyon]

Robb: I just came in from running it to try and test that the fan will kick off.... The needle was way up in the temp range, well above where it usually is before the fan kicks in. I take it you are trying to say the fan does not come on. I checked the fuses in the cavernous fuse box. Neither appears to be blown. I am not even sure that the fan circuit is fused?? It is fused. You must remove the right radiator shroud to get to the fuse. It sould be close to the horn. The other thing I am wondering. The bike is low on coolant (boiling over, tipping over etc...) If the coolant is low, below the low line, will that affect how the temp sensor in the head works? The temp sensor does not control the operation of the fan just the temp gauge. If you are low on coolant I would fill it up. I would check the fuse and all the connections on the fan relay and fan switch. John _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html