[dsn_klr650] dead on road update

DSN_KLR650
Post Reply
Janek Rebalski
Posts: 7
Joined: Sat May 06, 2000 12:46 pm

[dsn_klr650] dead on road update

Post by Janek Rebalski » Wed Jul 26, 2000 2:29 pm

  I suspect that the coasting enricher gizmo on the carb is not functioning correctly.   Consult http://www.geocities.com/~klrdsn/cvcarb/page2.html . To quote some of it here:  
"there's an air jet in the lower diaphragm chamber that transfers ambient pressure to one side of the coasting enricher's spring loaded cut off valve. The excess vacuum in front of the butterfly valve is transferred to a drilling that leads to the other side of the cut off valve. This sucks it open, allowing the pilot jet to feed more fuel to the engine preventing an overly lean condition. (Pop. Pop. Pop.)"
  Janek KLR650 '00 ----- Original Message ----- [b]From:[/b] BCDIRECT@... [b]To:[/b] DSN_klr650@egroups.com [b]Sent:[/b] Monday, July 24, 2000 8:32 PM [b]Subject:[/b] [DSN_klr650] Dead on Road Update   (...) but I still have the backfiring on deceleration.  Especially on downhills. It's quite annoying!

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests