DSN_KLR650
-
CrazyDave
- Posts: 52
- Joined: Fri Apr 07, 2000 4:57 am
Post
by CrazyDave » Sun Jul 23, 2000 2:05 pm
On Sun, 23 Jul 2000 12:48:20 -0500, Justin Painter wrote:
> Ok here is a stupid one. The screw to my choke adjustment (on the left
> handlebar) fell out and is dangling now which is quite annoying. I have
> called two dealers and both of them tell me the size of the screw is not
> listed and if I want a new one I will have to buy the whole assembly. Do
> any of you know what size the little screw that goes up through the
middle
> of the choke adjustment thing is?
>
> Justin Painter
> A4
>
Justin,
I dont know the size, but if is the allen head one through the center let
me know. I just had to buy the kit for a couple pieces. You are welcome to
the screw. Email me you address and I will send it out in the morning.
crazydave
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
-
carmic7@aol.com
- Posts: 75
- Joined: Thu Apr 06, 2000 8:10 pm
Post
by carmic7@aol.com » Sun Jul 23, 2000 7:15 pm
Hello list,
Friends of mine have purchased the european light switch pod for their BMERS
so they can idle without headlights, I would like this for the KLR so I
don't have to start the bike with the headlight on, anyone ever seen one? or
have any ideas?
also. what criuse control works on the KLR? The vista cruise is too thick
to get between the cable housing and grip flange.
-neil
Users browsing this forum: No registered users and 19 guests