Hi eroads,
Thanks for responding so quickly. I don't have a torque wrench yet, so I was
asking torque spec to get an idea of frame tube strength for educated
guess-torqueing. Will the tube dent or crack? (so that I know when to stop
tightening) 8^O
Thanks Again,
Eric
A13L
PS-for a name, I'm thinking "Moma's Nightmare" or "Beef" or "Girlfriend"
or [it moves out faster than an] "Angry Girl"
PPS-maybe winner of the Moab tire change contest could name it something?
Eric posts:
> Can anyone give me an approximation of the torque I should apply to
mount
> the U-bolt to the frame tube of the KLR when installing the Moose bash
plate?
> Should I also use the blue Loctite on the supplied locknuts?
> Thank you for your help,
> Eric
> A13L
>
eroads responds:
======== I'm sure there's a torque and maybe someone will give you an idea
but it's likely to be at the very low end of most torque wrenches. I'd
suggest you just get it good and snug with a regular open-end (box end)
wrench and definitely use the locktite.